Busca Hoja De Aluminio, 5083 Hoja De Aluminio, Hoja De Aluminio Para Camión Cisterna De Aceite en el directorio Industry, Reliable fabricante / proveedor / fábrica de China

Home > Lista de Producto > Lámina y placa de aluminio > Aplicación electrónica Hoja de aluminio 5005

Aplicación electrónica Hoja de aluminio 5005

Información básica

Modelo:  5005

Descripción del producto

No. de modelo: 5005 Aplicación: Herramientas de transporte Grado: Serie 5000 Técnica: Laminado en caliente Temple: O - H112 Superficie: Acabado de molino Especificación: Estándar de China Código HS: 7606129000 Tipo: Láminas de aluminio Forma: Superficie plana Tratamiento: Acabado de molino Aleación: Aleación Certificación : ASTM, JIS, GB / T, EN, ASTMB Marca registrada: HM Origen: China Aplicación electrónica 5005 Hoja de aluminio \ n \ nPlaca de aluminio súper ancha \ nAleación: 1050, 1060, 1100, 3003, 5052 5083 6061 5005 6082 etc.Electronic Application 5005 Aluminium Sheet
orteElectronic Application 5005 Aluminium SheetElectronic Application 5005 Aluminium Sheet Genio: H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O, etc. \ nEspesor: 0,2 mm - 400 mm \ nAncho: Menos de 2800 mm \ nLongitud: Menos de 10000 mm \ nEmbalaje: Estándar de exportación, cubriendo con papel marrón y película de plástico y luego empacado con banda de acero y caja / paleta de madera \ nOrigen: China \ nLlead Tiempo: Dentro de 25 días \ nProductividad: 4000MT / Mes \ nPago: T / T, L / C irrevocable a la vista \ nObservaciones: Los requisitos específicos de aleación, temple o especificación se pueden discutir según su solicitud.
Aluminium Plate / Slab 5052
Typical Chemistry (% Maximum unless shown as a range)
\ n \ n
Cu Si + Fe Mn Mg Zn Cr Al
0.10 0.45 0.10 2.2 / 2.8 0.10 0.15 / 0.35 Balance
\ n \ n
Characteristics
5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades.
Typical Applications
5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing.
Mechanical Properties
\ n \ n
  Tensile Strength Yield Strength Elongation Brinell Hardness
  ksi MPa ksi MPa % in 2"
(50mm)
 
5052-0 28.0 196 13.0 91 25 47
5052-H32 33.0 231 28.0 196 12 60
5052-H34 38.0 266 31.0 217 10 68
\ n \ n \ n
Aluminium Plate / Slab 5083
Typical Chemistry (% Maximum unless shown as a range)
\ n \ n
Cu Si Fe Mn Mg Zn Cr Ti Al
0.10 0.40 0.40 0.3 / 1.0 4.0 / 4.9 0.25 0.05 / 0.25 0.15 Balance
\ n \ n
Characteristics
5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion.
Typical Applications
5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels.
Mechanical Properties
\ n \ n
  Tensile Strength Yield Strength Elongation Brinell Hardness
  ksi MPa ksi MPa % in 2"
(50mm)
 
5083-0 42 294 21 147 22 -
5083-H321 46 322 33 231 16 -
\ n \ n \ n
Aluminium Plate / Slab 6061
Typical Chemistry (% Maximum unless shown as a range)
\ n \ n
Cu Si Fe Mn Mg Zn Cr Ti Al
0.15 / 0.40 0.4 / 0.8 0.70 0.15 0.80 / 1.2 0.25 0.04 / 0.35 0.15 Balance
\ n \ n
Characteristics
6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration.
Typical Applications
6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.
Mechanical Properties
\ n \ n
  Tensile Strength Yield Strength Elongation Brinell Hardness
  ksi MPa ksi MPa % in 2"
(50mm)
 
6061-0 18.0 126 8.0 56 25 30
6061-T4 34.0 238 22.0 154 21 65
6061-T6 (T651) 44.0 308 41.0 287 17 95

Grupos de Producto : Lámina y placa de aluminio